SP1 Zipper
The SP1 Manual Zipper Splicer features two roll positions driven by a standard Butler core roll drive system. The roll positions are loaded from the side, using minimal floor space. The standby roll splice is prepared in advance by the operator. Based on preset diameter the expiring roll will stop and the operator will need to perform a manual splice junction.
The packaging line continues to run, fed from an accumulator integrated into the splicer. The new zipper is spliced to the running web with a heat wire. The splice is released and the machine operates on the new roll, reducing waste and allowing non-stop production. The operator is provided with 1 minute of festoon accumulation to complete the splice at speeds up to 200fpm.
The Butler Zipper Splicer may be installed at any angle to the process and is optionally mounted on casters to optimize use of floor space. The machine may be rolled away for maintenance of the parent line or to be used on other lines.
|
Base Unit Standard Features:
• Formed Steel Frame • Heat Seal Splice Head System • PLC controls • Roll by Roll Configuration • Driven Roll Positions • Two Roll Shafts for Aisle Loading • Automatic Splice Cycle Actuation w/ Manual Splice Junction • Splice Imminent Output Signal • Auto Stop End Actuation – Tail Grab Switch and Mechanism • Air Filtration System • Control Panel Manufactured with UL, CUL & CE Listed Industrial Components |
Video Library
ROI Calculator
Butler on Youtube
