Integrated Hoist

The 1000-Series splicer features an integrated hoist to streamline the roll-loading process. The hoist is capable of lifting rolls from the floor onto both the lower and upper roll positions of the machine, with a maximum capacity of 3600 lbs (1632.933 kg).

One Step Splice Head

The 1000-Series Splice Head was designed to be as easy to use as possible, allowing splices to be prepared while the process keeps running.

A vacuum system holds the web of the idle roll firmly in place so all the operator needs to do is apply one strip of tape on the splice head and then close it. This simple, one-step operation minimizes the chances of splice failures due to human error, allowing the splicer to perform with over 99% splice reliability.

The splice head is available in different models to meet the needs of a variety of materials and processes. 

Nested Festoon

The Butler nested festoon of the 1000-Series Splicer provides an efficient solution to set up the splicer as quickly as possible.

In the nested position, the festoon's upper idlers are lowered and intertwined with the bottom idlers. The operator simply pulls the web through the center of the nested festoon and then the upper idlers are raised, completing the webbing process effortlessly.