Butler Automatic to Highlight SP1 and SP3HSL Automatic Film Splicers at PACK EXPO 2017

Visit Booth #3916 to learn how film splicers increase overall equipment efficiency

Butler Automatic announces that it will showcase its SP1 and SP3HSL Automatic Film Splicers at PACK EXPO 2017, to be held September 25-27, 2017, at the Las Vegas Convention Center in Las Vegas, NV. Butler Automatic experts will be on hand in Booth #3916 to demonstrate how Butler film splicers improve overall equipment efficiency (OEE) and increase packaging line output.

Drop by the booth to see how Butler equipment improves OEE – defined by equipment availability, performance, and quality. Equipment availability is improved by eliminating roll change downtime caused by manual film roll changes. Performance improvements come through Butler splicers’ consistent web infeed, resulting in fewer stops and starts. Butler splicers’ precise web control improves quality by providing filling and sealing consistency.

With a simple mechanical design and high-quality manufacture, the SP1 promises long-term, trouble-free automatic splicing performance. The device senses the diameter of the expiring roll of film and automatically splices the end of each expiring roll onto the new roll. It is capable of running at speeds of up to 600 feet per minute (FPM). The SP1 is an excellent investment for food, beverage, and medical device packaging operations because it drastically increases production uptime, improving your OEE, and resulting in a complete return on investment in just a few months.

Butler will also showcase its innovative SP3HSL automatic shrink sleeve splicer. Film roll changes must occur in shrink sleeve packaging applications as frequently as once every 8 minutes, and changing the roll by hand wastes minutes of production time. The SP3 Automatic Sleeve Splicer increases line efficiency by 9 percent or more in these applications. Capable of running at speeds of up to 600 FPM, the SP3HSL is ideally suited for increasing production time in consumer packaged goods and pharmaceutical applications utilizing shrink sleeve packaging.

Splicers Revolutionize Productivity for Food Processing Plant

Cincinnati-based JTM Food Group is still thanking its luck for stumbling upon a zero-speed automatic film splicer by Butler Automatic at PACK EXPO International several years ago. JTM vice president Joe Maas says they are still benefiting from the productivity wave three years later. JTM is a food processing plant with more than 700 food products, about 70 percent meat and 30 percent non-meat, which has grown from a neighborhood meat store in 1960 to today’s sales of $170 million, with 430 employees.

Until it purchased the Butler Automatic splicer, JTM was switching rolls of film manually on its Vertical Form Fill and Seal (VFFS) machines used for its grind and form and kettle cooking packaging operations. The time it takes to change rolls of packaging film is frequently the single greatest cause of downtime in packaging lines; Maas estimates that it was taking about 10 minutes for each packaging roll changeover, which mounts up considerably over the course of the day.

JTM had accepted this downtime as a cost of doing business until a few years ago, when while walking the PACK EXPO floors, Maas spotted a zero-speed automatic splicer exhibited by Butler Automatic. The splicing technology joins a new roll to an expiring one without stopping the production line. When the splice is complete the accumulator is re-filled and the expired roll can be changed while the new roll is running, eliminating roll change downtime in production.

Maas found the Butler splicer to be a straightforward machine that is routine to operate. He shared with Butler that the true cost benefit for a particular process depends upon how many hours one runs a VFFS machine. If lines are busier, the cost benefits became more obvious. Mass says he goes through 50 rolls a week, which translates into about 500 minutes or just over 8 hours of production time gained by adding the Butler splicer.

Maas said, “The bottom line is that the automatic splicers give us more uptime on our VFFS machines and we produce more product. I have made a lot of money as a result of stopping by their booth.”

Read more in the April issue of Packaging World.

Shrink Sleeve Packaging on the Rise

By Michael Mucci, Vice President of Engineering, Butler Automatic

Shrink sleeve packaging is on the rise, largely in the beverage industry, because it allows the product manufacturer to make use of the entire surface of the package for artwork and information. This type of packaging enables rapid, cost-effective packaging design changes, providing product marketing groups the ability to make sure that the product stands out from competitive products on the shelf. As with all packaging applications, finding ways to increase efficiency is critical in shrink sleeve packaging operations, as increased efficiency directly translates into higher throughput and greater profit margins.

Like all other packaging film, shrink sleeve film must be spliced together. The typical challenge to creating a hand splice in these applications lies in operators’ ability to achieve a consistent splice joint for smooth operation over the mandrel. In many cases, an overlap joint is created with the expiring tube of material being “tucked” inside the new tube, thus allowing the new material to be guided over the mandrel.  This can create issues if the combination of the tape and double-thickness of shrink sleeve does not move smoothly over the forming mandrel.

Automatic splicing technology in the form of the patent pending Butler Automatic SP3HSL Sleeve Splicer solves the challenge of striking a balance between fast splices to minimize downtime and accurate, well-formed splices. Butler’s SP3HSL provides a zero-speed, in-registration, automatic splice from an expiring roll of film to a new roll, all while continuously providing film to the downstream process at speeds up to 450 feet per minute without interruption or any need to reduce the process speed.  The SP3HSL provides a butt-splice joint with tape on both sides, ensuring smooth motion over the forming mandrel.

Automatic splicing technology enables packaging operations to fully reap the benefits of this type of packaging, in terms of marketing optimization and rapid, cost-effective packaging design changes.

Learn more from Food News International. 

Butler Automatic Introduces Enhanced Register Sensor for SP1 Automatic Film Splicer

Sensor provides greater resolution and simpler control for reduced packaging film waste 

Middleborough, MA– Butler Automatic, the inventor and global leader of automatic splicing solutions, announces that it has developed an enhanced register sensor for new and existing SP1 Automatic Film Splicers. The new register sensor improves upon the previous sensor’s accuracy and reliability, and features software that more precisely controls the splice position, thereby reducing packaging film waste.

The register sensor in the SP1 Automatic Film Splicer uses registration marks on the film to provide an automatic, in-registration butt splice. In doing so, the splicer provides the downstream process with a consistent product pitch or imprint spacing, eliminating the need for re-registering the film in the process after a splice. The register sensor is critically important to minimizing film waste.

Butler’s new register sensor delivers a wider range of sensing and has proven to be more reliable in distinguishing between similar colors than the prior generation.  As a result, manufacturers are now able to have print across the full width of the film, even when the print is similar in color to the black register marks.

Additionally, while the prior design required the operator to physically relocate the sensor in the in-web direction when adjusting between products of different length or pitch, the new control software allows the operator to achieve the same result simply by entering an offset value on the touch screen user interface. This enhancement allows operators to locate the splice in different positions on the final product more easily.

The new register sensor is available as an option on any new Butler SP1 Automatic Splicer. In addition, it is available for retrofit with any Butler SP1 Splicer that shipped with the factory-installed Bi-Directional Registered Splice Option and also has a touch screen user interface. In these machines, it provides the full functionality when installed as a retrofit. The retrofit includes replacement of the sensor head with the new head and amplifier, and upgraded controls and user interface software to support the registration offset functionality. Customers with older splicers who desire improved resolution can contact the Butler Service and Parts Department to check for retrofit compatibility.

Butler Automatic Film Splicers Increase Profitability and Reduce Lead Time

With automatic splicing, pre-applied zipper film is easy to incorporate into existing packaging lines 

Middleborough, MA– Butler Automatic, the inventor and global leader of automatic splicing solutions, announces that its film splicers such as the SP1 Automatic Splicer make pre-applied zipper film easy to incorporate into existing packaging lines. As a result, these splicers greatly increase profitability and reduce lead time for reclosable packaging. Butler’s automatic splicers are engineered with a small footprint, and are custom built to fit on the front end of virtually any flexible film packaging line. Butler splicers make reclosable packaging retrofits a possibility for many packaging lines.

Reclosable packaging is in a period of rapid growth, as many manufacturers realize the added value reclosable features offer consumers. This is especially true in the food industry, where a push towards reclosability has led to the implementation of a number of reseal technologies. Many methods of adding reclosable features to an existing flexible packaging line require large capital investments, but pre-applied zipper film can be an ideal tool for companies looking to make the shift to reclosable packaging without significant up-front costs or extensive lead time.

Rolls of pre-applied zipper film are less dense than traditional film roll stock, leading to fewer impressions per roll and therefore less time between roll changes. Automatic splicing eliminates the downtime of these additional roll changes, dramatically improving the profitability of packaging with pre-applied zipper film.

With a simple mechanical design and high-quality manufacture, the SP1 delivers long-term, trouble-free performance. The device senses the diameter of the expiring roll of film and automatically splices the end of each expiring roll onto the new roll.

Benefits of Pre-Applied Zipper Packaging Film

Reclosable packaging is in a period of rapid growth, as many manufacturers realize the added value reclosable features offer consumers. This is especially true in the food industry, where a push towards reclosability has led to the implementation of a number of reseal technologies: traditional zip locks, slider locks, reusable adhesives and even Velcro-like closures. You may be considering adding a reclosable feature to your packaged products, or may have heard about the hype around new kinds of packaging, but likely have questions about the affordability of such a change. Packages constructed from pre-applied zipper film can be an ideal tool for companies looking to make the shift from traditional to reclosable packaging without significant cost or lag time.

Read the full article in Food Manufacturing.